Martin-christ Epsilon 2-6D LSCplus Manuel d'utilisateur télécharger pdf (Page 47)

Freeze-dryer EPSILON 2-6 LSCplus

6 Operation

Version 10/2012, Rev. 1.6 of 16/12/2014 • sb

Translation of the original operating manual

Option: USB process recording (see chapter 6.6 - "Optional extensions and

special equipment")

• Select the "Process recording" function in the dialog box "Tools".

• Select the input fields ("Batch data"). A keyboard for the data input will

be displayed.

• If necessary, select the “Options” tab, choose between manual or

automatic recording, and define a recording interval.

• Press the "return" button in order to close the dialog box.

The process recording will now run in the background.

Fig. 29: Dialog box “USB process recording”

Option: Pressure increase test (only with the double-chamber method)

The  pressure increase test can only be performed when the freeze-dryer

is equipped with an intermediate valve. The performance is possible in the

manual mode as well as in the program mode, Additionally, the pressure

increase test can be automatically performed as part of a program (see

chapter 6.5.3.1 - "Creating a program").

• Select "Pressure increase test" in the "Tools" dialog box.

• Enter the set values for the duration and maximum pressure increase

with the aid of the buttons.

• Start the pressure increase test. The test time will be displayed. After

the end of the test, a status message (pressure increase was

successful or failed) will be displayed together with the measured

values:

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 134 135

Pas de commentaire

Martin-christ Epsilon 2-6D LSCplus Manuel d'utilisateur Page 47